Wednesday, February 6, 2013

Baby Blue Corduroy Embroidery Kit Clutch

 

I loved making the embroidery tool pouch yesterday, and I think it will serve my purposes just fine, but I kept thinking all night last night about how I could make it better and cuter.  I just couldn't let it go, so today I went back to the craft room and tried again. I wanted to make it smaller, and more secure, a one handed grab and go clutch.

This is my first idea sketch.
 
I drew it out putting in measurements that I estimated and then calculated with seam allowances and hem allowances.  I even wrote out the order of the steps in the sewing process. Yes, that is my horrible handwriting.  Don't worry if you can't read it. No one can read it but me.
 
I made pattern pieces because I wanted to make the curves and corners precise. I used my new drafting ruler, which I love.

This is how the first one turned out.  I have it posted on Etsy for sale, but I have a pattern so I can whip up as many more as I would like.  It turned out pretty well.

The next one will have shorter pockets so that they don't reach right up to the edge of the clutch and the marker and ruler don't disappear inside their slots, but otherwise it worked just great.

Here it is with all of the supplies taken out of the pockets.


My favorite part was making this expandable pocket for the round things like a thread spool and thimble. The button flap is longer so I can cram this pocket full if I want.
 
If you like this, check it out on Etsy at this link:
 
Have a great day!


Tuesday, February 5, 2013

Baby Blue Corduroy Embroidery Kit

Man, I was bored today, or at least I would have been if I didn't have an unlimited supply of odd fabrics and ample crafting space in my attic crafting room.  I decided to make a folding wrap to put my hand sewing/embroidery tools and supplies into when I take my hand sewing with me on the go.

Here it is.  I finally found a use for a couple of my odd colored bright green large buttons. I think they fit perfectly.  I had to borrow my aunt's sewing machine to make the button holes. They turned out rather nice.

Here is the inside.  I probably could make it a bit shorter and use less fabric, but I was just making it up as I went.  For embroidery you need floss, scissors, needles, a thimble, and a transfer pencil or water erasable marker.  I also think I will keep a folded piece of tracing paper, just in case.  With the large size it would also be possible to fold an embroidery project in progress and enclose it within the wrap to protect it and keep it with the supplies.

A closer look with neat bows.

Here is everything laid out of its pocket.  If I were taking hand sewing with me I could put a spool of thread in the thimble pocket, even a large spool fits, or tie one or two spools in with the ribbons.  I would also need sewing needles instead of embroidery needles, and could want a chalk pencil rather than a transfer pencil. This is not the  thimble that I actually use, but was god enough for a photo prop.

This is what the back looks like.  I could have avoided the seams showing on the back if I would have sewed the pockets on before I sewed the layers together, but I am not too picky.  If I were to make these for selling on Etsy, then I would be more careful with things like that.  I also would try to make the seams a little straighter.
 
I have a color theme going on in my craft room.  It was totally unintentional, but almost everything, from plastic bins and baskets to the projects in progress are light blue, bright light green and white or cream.  I had a whole bolt of this light blue corduroy just sitting there, so I thought it would look nice and be very functional. I got the bolt of fabric at the community yard sale at the Toyota Center in town last year.  I think I paid 5 dollars for the entire thing.  There is at least 15 yards on it.  Carrying it around the sale afterward was a bit heavy.  I was with my aunt and she got a bolt of very heavy dark blue denim.  That was even heavier.  They were too good a deal to pass up, even with the heavy load we had to carry with us the rest of the trip and all the way back to our car afterward.

Log Cabin Baby Quilt

I mentioned in an earlier post that I had made log cabin squares from the scraps left over after making the Girl's Day baby quilt for my baby cousin, Lyra.

You may remember this picture I took of some of the squares.
 
I started with dark colors for half of the squares and light for the other half to use up more of the different colors, but I didn't really have an overall design in mind for the quilt when I made them.  I made mock up designs in Corel Draw to see what arrangement might look the best.

This is how it might look if I put them in rows of similar colors.

This is how it might look with alternating colors and also changing the orientation of the squares.


I liked the look of alternating the squares, so I laid them out on the futon upstairs.  This is with them all oriented the same way.  I think it looks pretty nice.  I will go ahead and sew them together like this.  I am having a bit of a dilemma, though. With just the squares, the quilt is 32 inches by 48 inches.  I want it to be a crib sized quilt which is usually about 36 by 52.  This means I need about four inches in both directions.  I could solve this problem by adding a two inch border all the way around, but that would change the look of the quilt considerably.

This is a close up shot of one strip of the Winnie the Poo fabric I added.  I had this fabric in my collection and used it to make the scraps stretch farther.  It has eyelet holes, so I basted it onto a second layer of white muslin before piecing it together.  So far, I have left in the basting stitches. You may be able to see them in the above shot, if you look closely.
 
This is all the scraps I have left.  If I cut them into two and a quarter inch strips, I don't think I will have enough to make it all the way around the quilt.  I checked at Joann's last time we went, and they only had a few fat quarters of two of these fabrics left.  They were on sale, so I bought one of each, I am contemplating the best way to put this together.  Also, I still have not bought the batting for it.  It will be on sale next weekend, for 50% off, so I will try to get it then.
 
I don't know what to do about quilting or tying it.  My sewing machine will not handle quilting.  It just isn't built for that.  I don't have a walking foot and my feed dogs do not go down.  I could hand quilt it, but I really don't think I will have time.  I have decided to try and finish this quilt before St. Patty's day and give it to my cousin, Courtney, at her baby shower. She is having a little boy. All of this put together means I will probably tie this quilt just like I did the other one.  Babies like those ties, anyway.  They like to feel them and look at them.  It gives interest and texture to the inside of their crib.
 
I laid out the quilt with 2 inch borders and put in virtual ties in Corel Draw.  This is the most uniform arrangement I could come up with without putting ties on seams.  I don't like putting ties across seams because it is hard to do.  The seam allowances make it harder to push the needle through and it puckers more when you tie it.  You can see that they are not all exactly the same distance apart.  The center square tie is two and a half inches from the next one over and then the next two are three inches apart. This is more evident along the border. I think it will look okay as long as I am careful about making them straight and accurately spaced.
 
I will be posting about this quilt next week, probably, after I get some batting for it.  After all, I have loads of curtains to sew and a corset to floss in the meantime.
 

Monday, February 4, 2013

First Corset Finished, Almost...

I got the two 11 inch bonings from corsetmaking.com on Saturday.  I didn't get to get working on my corset until yesterday, Sunday, because my craft room had been taken over by fourteen and fifteen-year-old girls.  I mentioned in an earlier post that my very creative fourteen-year-old daughter has been making duct tape corsets and using up all of my grommets.  She and her friends decided to get together and make a bunch of duct tape waist cinchers as a fund raiser for band camp.  They had all sorts of decorative duct tapes and lacings and were up there in the craft room for about eight hours straight.  They asked me to order them pizza for a dinner break at 5:00pm and then went right back up until people's parents started calling and coming by to pick them up.  I couldn't believe that they got so many done.  Most of them are waiting for grommets, but are otherwise finished.  The order with the grommets should be arriving on Wednesday.  I will be posting some of their cinchers in my etsy shop for them to see if they sell there.  When the post is ready I will also put a link to it here and on my Facebook page.


So, I finally got to work on my corset on Sunday morning.  I knew we would be going to my aunt and uncle's house for the Superbowl and I wanted to get the machine sewing parts done so I could bring the hand sewing with me.  I was not too excited about watching the super bowl, because the Seahawks weren't in it, but the Superbowl at their house is a tradition and the food and company is always good.


The last two bonings had to be inserted into their channels, and then I sewed across the top edge to keep them all in.  I then began the painstaking ordeal of finishing the top and bottom edges. I trimmed them up neatly and cut off all the scraggly threads.  I have read how to avoid having all of these.  I will give it a try next time.


I pinned and sewed on the satin bias tape.  I had to rip and resew the first one because I misjudged the width I would need to wrap over the edge.  Still, the first one I sewed (twice) was still not perfect, but ripping it again would not be good for the tape or the corset, and I didn't have extra tape, so I just said, "heck with it," and left it.  This is my first corset and I don't expect it to be perfect.  I am trying my best though.  The rest of the edge binding looked better.

Next I folded the binding over and pinned it so I could hand sew it during the Superbowl.


I put them in a pillow case for transport to try and avoid dirt and cat hair.  I also ate my hot wings first, washed my hands and stayed far away from the food while I worked. I only got half done, during the Superbowl. I must admit I didn't work the whole time.  I also had to hold my baby cousin, eat a bit of Superbowl food, and drink a beer.  I finished the hand sewing after I got home.  I put "Hot Fuzz" in the DVD player and sewed while sitting on the couch until I was done.  I do like that movie. It is pretty funny.
 
Here it is as it was when I went to be last night:
 
It is finished enough to wear at this point, but I still want to add some details.  I want to floss the boning ends to reinforce them, make them stay in one place and prevent wearing through the fabric. 

This is the first one I did this morning.  It isn't perfect.  The stitches are too close together and not very even.  I also noticed that after I started stitching the first end the bone shifted towards the other end.  This is hard to prevent.

This is the second one I did.  It is the other end of the same boning channel.  It looks a lot better.

 Here is the whole bone so you can see both ends. It being white on white, or whitework, it isn't very noticeable.  It will give the corset a little bit of fanciness without making it really busy.  I think I will like it when it is done.
 
I only had time to do the four bones around the grommets so far today.  It is painstaking work. I will probably get faster at it as I go, and better, but it will take me a while.  I will try the corset on for pictures as soon as I have time and someone here to assist me.  I can't wait.
 
Here is the top of the back.

And this is the bottom.

From a few feet away it is not very visible, but I think it is still worth it.
 
 
I have been reading about how to make corsets, stronger and how to adjust the patterns so that they fit better.  I have loads of ideas for next time.  I also read about how to make and add an underbusk and lacing panel. I think I might do that for this corset.  That will, of coarse, mean another corsetmaking.com order, so I will wait on that.  They are added after the corset is done anyways.  Next time I will put my twill tape waist reinforcement in before I put in the busk and I will add my grommets after I sew all the layers of the corset together and put the bonings in.  This is supposed to make them turn out straighter and smoother.  Also, instead of pressing the seams open I will try pressing them to the side and topstitching them.  This puts the stress of tight lacing on the fabric grain instead of the seams.  My next corset will have a facing fabric of silk brocade.  I will also try making my own bias binding.  I think it will look better.